| |
|
Production of turbochargers. New turbochargers.
|
In production take part about 50 highly qualified specialists, that before worked in machine-bulging factories of Melitopol and its Zaporozhye area.
Production consists of separate parts: procurement, thermal, mechanical, assembly, the part of welding by frictions, packing, and the warehouse of ready production.
Productions are equipped high productive equipment, technical attachments, control and measuring instruments and devices of digital indication. Presence of benches NPC and universal assembly devices allows construct speeded up preparation of production of new articles.
We produce the next turbochargers: TKR-6; TKR-7Н-1; TKR-8,5С-1; TKR-8,5С-3; TKR-8,5С-6; TKR-8,5С-17; TKR-8,5Н-1; TKR-8,5N-3; TKR-11N-1; TKR-11N-2; TKR-11Н-3; TKR-11238НБ (YMZ); TKR-9ST; TKR-012 and all range.
Turbocharger for cars:
KaMAZ, ZIL, MAZ, Super-MAZ, BeLAZ, PAZ, bus LAZ 695, KrAZ, bus PiAZ, Ural and so on.
Turbocharhger for tractors:
К-700А, Т-130/170, Т-150К, Т-150Г, Т-157, Т-158, Т-170М-01, Т-157С, Т-330, ТТ-330, МТZ-100, 890, 892, LCHT-100, ТB-114, DТ-75Н, DТ-75Г, DТ-75Д, Т-90P, DZЗ-42, DZ162, DU-68, DТ-175С, LTZ and so on.
Turbocharger for combines:
"Niva", "Don-1200", "Enisey-1200", "Kedr-1200", "Don-1500", "Kolos", СК-5, СК-6, СКD-6, ККС-6, "Seberak", СК-5М, СКD-5А, "Chersonez-200", "Polesye-250", "Don-680", КСК-4, КСК-100 and so on.
Stand for dynamic balancing the model BVE-03-09Т is intended for definition of parameters of dynamic instability rotors like turbine, the mass of which is to до 3,0 kg in four planes. Turning of rotor realizes by the help of level infinity belt. Definition of parameters disbalance realizes by the turning of rotor on its necks in the box of prisms that were installed on the block of stand. The center of weight can be found as between two blocks as over its limits.
Parameters of balancing rotors should be corresponded to technical dates of stand, correction of weights of balancing rotor by mechanism of stand are not provided. Terms of exploitation of UHL4 by state standard specification 15150-69. Parameters of disbalance are fixed with the help of electronic measuring instrument that was built with application of microprocessor technique.
Stand closed cycle represents motorless device for modeling of different modes of the work of turbocharger, that are corresponded to modes of its work on the motor and for definition parameters of turbocharger on these modes according to the technical terms on the turbocharger. It is intended for the motoless test of TKP motors of inner burn with the goal to define the attributes of quality. Checking of production is realized selectively; about this fact is made a mark in the passport.
We invite you to cooperation. We hope that our opportunities will help you to solve your problems.
We organize the dealer’s net.
|
|
|
